Hallway Hardwood Flooring Install Progress (Plus A Few Installation Tips From A DIYer) – Addicted 2 Decorating®

Hardwood Flooring

Note: If you’re not interested in flooring, please scroll down to the end of this post and read an important message from me!!

Yesterday, I got started on the installation of the hardwood flooring in the hallway, and I got about 2/3 of the way through. At one time, I had mentioned trying a herringbone pattern for the hallway, but the more I thought about it, the more I realized I didn’t want to introduce yet another pattern in this small area.

My hallway bathroom is bright and colorful, the hallway has striped walls, and as I showed you yesterday, I want the guest bedroom to be fun and colorful as well. And I have something really interesting planned for the home gym. So I wanted to keep the hallway floor calm.

Plus, every time I come across this older picture of the hallway and music room, I just love how the flooring is all continuous through this area…

So I decided to keep it simple and install the new flooring just like the original flooring. Here’s the progress I made…

Some parts of this installation were a little tricky for this DIYer (although they would have been a breeze for a pro), so I wanted to share with you how I handled some of the tricky areas.

I started the install in the cased opening between the music room and the hallway. The tricky part of this area was that the exposed edge of the original flooring board was the groove side, and in order to start the install right there, I needed that edge to be a tongue edge.

In order to change directions in the middle of a hardwood flooring install, they make these hardwood splines that can be inserted into the groove to act as a tongue. This allows you to put two groove edges together securely.

So I glued this spline right into the groove of the original floor board…

And then I was able to add the new board, going in the right direction, with the groove edge against that original board…

With the tongue now going in the right direction, I could proceed with installing the rest of the boards.

I had about 18 inches of flooring installation before I reached the next challenging area — the doorway into the bathroom. I decided to use two pieces of hardwood flooring going across the doorway as a transition, and then butt the hallway flooring right up next to those transition pieces…

The problem here is that I should have cut the tongue off of the board that went right next to the bathroom tile so that the groove edge was exposed. But I didn’t think to do that, and once that first board was wedged in there tightly, there was no getting it out.

So I ended up having to use my table saw to cut the the tongue off of the second board (i.e., the board that would butt up to the hallway floor boards). This gave me a smooth edge with neither a tongue nor a groove.

Now a professional in that situation probably would have taken the time to use his or her router to route a groove into that board. However, I am not a professional, and I didn’t have the appropriate router bit to cut a groove for hardwood flooring. So instead, I opted for wood glue. I simply made sure that I was putting a cut end right up against the cut edge (i.e., I didn’t leave the groove in the ends of the hallway floor boards, but I cut them off to give me a smooth end), and I added wood glue before installing those boards…

I feel confident that once that glue is dry, those boards will be securely in place against each other.

I got most of that flooring installed in that doorway before I hit the other doorway — the doorway between the hallway and the guest bedroom on the opposite wall.

This one was much easier. Because I’m not a pro and didn’t want to take a chance on lacing in the new boards with the old boards and making a real mess of things, I installed transition strips in this doorway as well. I used wood glue to install the first transition board up against the guest bedroom flooring. And on the second board, I left the tongue attached…

I was able to do leave that tongue attached because it was on the correct side for the grooves in the ends of the hallway boards to fit onto the tongue on the edge of the transition strip…

So those looked quite nice and fit together perfectly.

So the bottom line is that it just takes a little bit of thinking through which direction everything needs to go, which sides the tongues and grooves are on, and how everything is going to fit together. And as is always true when you’re a non-pro DIYer like me, you have to figure out how to improvise when we lack the skills and tools that the pros have. ? But even with my workarounds, I think this is going to look great once it’s sanded and finished.

A Special Note:

I got a comment on yesterday’s post from someone telling me how disappointed they were to come to my blog and see a political advertisement.

Y’all, I cannot stress this enough, so please hear me on this…

We bloggers do not choose the specific ads that appear on our blogs. An ad for a political candidate, product, or service, is not an endorsement from me.

Y’all know that my blog is a politics-free, current events-free zone. If there’s a tsunami in Asia, OF COURSE everyone is sad about it. Y’all don’t need commentary about it from me. The 2020 presidential race is just getting started, but y’all don’t need commentary from me about it.

So when it comes to ads, I have the ability to choose general categories of ads that appear or don’t appear on my blog. I can allow certain categories. I can exclude certain categories. I personally have chosen only family-friendly ads, and have chosen to exclude categories such as pharmaceutical drugs, gaming, dating, and yes…POLITICS.

But even though I have chosen to exclude those categories, sometimes those slimy little suckers will slip through the cracks. I don’t have any control over that, and again, those do not constitute an endorsement on my part, whether it’s the latest and greatest pharmaceutical drug that will cure your ailments, or whether it’s one of the 3,497 candidates running for POTUS.

If you see an ad on my blog that you find offensive or off-putting, feel free to tell me about it. But please understand that I can’t do anything about it if you just leave a general comment about how you’re offended because I had a political ad on my blog. I need to know details about the ad so that I can pass that detailed info along to the company that handles the ads on my blog. If they don’t have details, they can’t track down the ad and figure out how it slipped through the cracks.

Thanks for understanding. ?

This content was originally published here.