Is Prefinished Hardwood Flooring Right for Your Home? | Bob Vila

Hardwood Flooring

Photo: istockphoto.com

Hardwood floors add natural warmth to any room, but the traditional method of putting in hardwood is time consuming, messy, and exposes the installer to toxic fumes from stains and sealants. No wonder even avid DIYers often opt to hire a pro for the job! Prefinished hardwood flooring—hardwood planks with stain and sealant already applied—offers an easier alternative to achieving the beauty of a real wood floor. Like all flooring materials, however, prefinished hardwood has pros and cons, so read on to learn about its benefits and drawbacks to decide if it’s the right material for your home.

Prefinished hardwood flooring offers a more durable finish.

During manufacturing, prefinished hardwood floors are treated with an aluminum oxide crystal sealant—one of the best hardwood floor finishes for an extremely rugged surface that can withstand heavy foot traffic, moving furniture, and other forms of wear and tear. Conversely, traditional hardwood floors are first nailed into place and then stained and sealed. Because neither DIYers nor flooring contractors have access to manufacture-grade sealants, traditional hardwood floors aren’t as durable as their prefinished counterparts and can begin to show scratches and surface dulling in as little as five to seven years. Prefinished flooring coated with superior chemical sealers can maintain its good looks for as long as 25 years without dulling or wearing thin.

Fewer design options are available with prefinished flooring products.

With traditional hardwood flooring, you can choose from dozens of wood species and then select from dozens more stain and sealant options. This allows you to get the exact wood grain look, color, and surface sheen you want. Not so with prefinished hardwood, which comes in a limited variety of wood types (such as red oak and maple), colors, and sealants.

The installation of prefinished flooring is quick.

There’s no denying the simplicity and speed of installing a prefinished wood product—a boon for homeowners living in the house during a renovation. Installing a traditional wood floor can take two weeks or longer, because it occurs in phases: installation of the planks, sanding the surface, staining the hardwood floors, and then applying two or more coats of a sealant that may need days to cure. Not only is the process lengthy, but it’s also messy and can produce toxic fumes. With prefinished flooring, there’s no downtime—as soon as the planks are installed, you can walk on the floor and start arranging your furniture.

Subfloor discrepancies can show through on a prefinished wood floor.

When installed on a level subfloor that has no dips and heaves, prefinished hardwood flooring will look just as smooth as a traditional hardwood floor. But unlike traditional flooring that can be sanded to remove lippage (slight inconsistencies in floor level where planks abut), prefinished planks cannot be sanded because the boards are already finished. If the subfloor floor is uneven in spots, this could cause some of the planks to raise slightly or result in visible gaps between the planks. The effect is usually minimal, but depending on the amount of subfloor unevenness, it could be noticeable.

Photo: istockphoto.com

Prefinished hardwood floors have visible seams.

In order to give the top of planks a smooth finish, the manufacturer creates bevels along the top edges of each plank, called “cambers.” These bevels are very small, just a tiny fraction of an inch, but when two planks are installed side by side, the bevels create a shallow “V” groove along every seam, creating visible lines. While some people like the look of the grooves, others prefer the perfectly flush look of a traditional wood floor that has been sanded smooth. The grooves may also serve as a spot for dust and debris to collect, making prefinished floors slightly harder to keep clean.

Prefinished hardwood planks can be refinished.

Install prefinished hardwood and it will stay looking new for decades. But if down the road you decide you’d like to change the stain, you can do so. A prefinished hardwood floor is still solid wood, after all, so the surface can be sanded and a new stain and sealer applied. Sanding the finish usually takes a little longer than it would with a traditional wood floor, however, because the sealant is harder.

Prefinished planks and traditional wood floors cost about the same.

While it takes much less labor to install prefinished hardwood planks, the planks themselves are costlier than traditional unfinished wood planks. What you’ll save in labor, you’ll most likely make up in the cost of the planks. Expect to pay between $5 and $10 per square foot, depending on the type of wood and quality of the finish, to have prefinished wood flooring professionally installed.

Installing prefinished hardwood planks is DIY-friendly.

If you’re planning to install your own hardwood floor, prefinished is by far the easier process. You’ll still have to nail each plank to the subfloor individually, but there’s no messy sanding and then cleaning to get the room dust-free, which is necessary before staining and sealing. Likewise, you won’t have to worry about inhaling harsh stain and sealant fumes. If you opt to go the DIY route, you can save $2 to $5 per square foot over the cost of professional installation.

Photo: istockphoto.com

Consider this when selecting the right prefinished hardwood for your flooring.

Should you decide prefinished hardwood is the right choice for your home, the following tips will help you choose the right planks for your project.

This content was originally published here.